39
Automatic volume adjustment
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic volume control
(Auto volume) reduces this problem by equalizing
levels.
Watching TV
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
3
Press
a
/
b
to select “High”, “Middle”, “Low”
or “Off”, and then press ENTER.
Press
a
/
b
to select “Auto volume”, and then
press ENTER.
4
5
Clear voice
This function emphasises speech against background
noise for greater intelligibility.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
3
Press
c
/
d
to select “On”.
Press
a
/
b
to select “Clear voice”.
4
5
Press
a
/
b
to select your desired output
system, and then press ENTER.
6
Digital audio output
This function allows you to select your favourite audio
output system.
Press
b/c/d
to select “Option”.
Press MENU and the MENU screen displays.
1
3
Press
a
/
b
to select “Digital audio output”,
and then press ENTER.
5
Selected item Description
PCM The optical output format is normally in
PCM.
Dolby Digital When set to “Dolby Digital”, Dolby Digital
is output when the Dolby Digital audio
formats are received.
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
2
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
4
PCM
Dolby Digital
Selected item Description
High Reduces the volume gaps among different
sound sources strongly.
Middle Operates on a level between “High” and
“Low”.
Low Reduces the volume gaps among different
sound sources slightly.
Off Does not reduce the volume gaps among
different sound sources.
NOTE
• Digital audio is not output during the USB mode.
40LX710H_en.indd 3940LX710H_en.indd 39 2010/04/15 16:12:192010/04/15 16:12:19
To Next Page
Loading...
Need help?
General