Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-37AG2+AN-37P30 or AN-52AG4 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-37AG2+AN-37P30 or AN-52AG4 (SHARP) wall mount bracket.
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using a SHARP recommended bracket to mount the TV
• You can ask a qualifi ed service professional about using a SHARP recommended AN-37AG2+AN-37P30 or AN-52AG4 bracket
to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Appendix
NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
Hanging on the wall
AN-37AG2+AN-37P30 and AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting Angular mounting
About setting the TV angle
0
/
5
/
1
0
°
AN-37AG2+AN-37P30
(LC-40LX710H)
0
/
5
/
1
0
/
1
5
/
2
0
°
AN-52AG4
(LC-46/52/60LX710H)
67
40LX710H_en.indd 6740LX710H_en.indd 67 2010/04/15 16:13:052010/04/15 16:13:05
To Next Page
Loading...
Need help?
General