Sharp LC-40LX710H User Manual

36
w
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
NOTE
• 3D-Y/C is not selectable depending on the input signal type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
w
Monochrome
When set to “On”, images are displayed in monochrome.
Selected item Description
Standard Normal adjustment
Fast For movie image
Slow For still image
Selected item Description
Max. -16 through +16
Min. -16 through +16
• This function is available only when the OPC setting is set
to On or On: Display.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
•
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
NOTE
H
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of -16.
Advanced picture settings (Continued)
Adjusting the image position
For adjusting a picture's horizontal and vertical position.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Position”, and then
press ENTER.
5
Press
a
/
b
to select “H-Pos.” or “V-Pos.”.
6
Press
c
/
d
to adjust the item to your desired
position.
7
Position
Display position adjustment
0
H-Pos.
0
-8 +8
V-Pos.
-8 +8
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, and then press
ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
Selected item Description
H-Pos. Centres the image by moving it to the left
or right.
V-Pos. Centres the image by moving it up or
down.
Game play time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under “AV
mode” for the input mode of the terminal connected to
the game console before starting the game.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Game play time”.
4
Press
c
/
d
to select “On”.
5
Selected item Description
On The elapsed time is displayed every 30
minutes when you switch to GAME mode in
external input mode.
Off No adjustment
NOTE
“Game play time” is reset after performing the following
operations:
1. When toggling the input.
2. When changing “AV mode”.
Press
b/c/d
to select “Option”.
3
Press
a
/
b
to select “Screen effect” and then
press ENTER.
4
Press
b/c/d
to select “Option”.
3
Other picture settings
Watching TV
40LX710H_en.indd 3640LX710H_en.indd 36 2010/04/15 16:12:122010/04/15 16:12:12

Sharp LC-40LX710H Specifications

General

Brand	Sharp
Model	LC-40LX710H
Category	LCD TV
Language	English