Sharp LC-40LX710H User Manual

30
Watching TV
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
1
2
Sleep timer: Remain 2 hr. 00 min.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.
Off
Energy conservation settings
Using Sleep timer on the menu screen
Press MENU and the MENU screen displays.
1
Press
c/d
to select “Setup”.
Press
b/c/d
to select “ECO”.
3
Press
a
/
b
to select “Sleep timer”, and then
press ENTER.
4
2
Press
a/b
to select “Change”, and then
press ENTER.
5
Press MENU and the MENU screen displays.
1
Energy save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
ECO picture control
This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press
a
/
b
to select “ECO picture control”.
4
Press
c
/
d
to select “On” or “Off”.
5
Press
a
/
b
to select “Energy save”, and then
press ENTER.
4
Press
a
/
b
to select “Standard” or
“Advanced”, and then press ENTER.
5
Selected item Description
Standard Reduces the backlight brightness by
25%.
Advanced
Reduces the backlight brightness by
50%.
Off The backlight brightness is the same
value of your settings in the selected “AV
mode ”.
Press
b/c/d
to select “ECO”.
• ECO menu displays.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)” or “Auto”.
• This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
Press c/d to select “Setup”.
2
Press
b/c/d
to select “ECO”.
• ECO menu displays.
Press
a
/
b
to select the desired item, and
then press ENTER.
6
3
3
40LX710H_en.indd 3040LX710H_en.indd 30 2010/04/15 16:11:572010/04/15 16:11:57

Sharp LC-40LX710H Specifications

General

Brand	Sharp
Model	LC-40LX710H
Category	LCD TV
Language	English