Sharp LC-40LX710H User Manual

48
Settings when using external devices
Press MENU and the MENU screen displays.
1
Press
b/c/d
to select “Option”.
3
Press
a
/
b
to select “Colour system”, and
then press ENTER.
4
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press ENTER.
5
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
PAL-60
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “Auto”.
• If “Auto” is selected, colour system for input signal is automatically
set. If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting an S-VIDEO or
composite signal.
Colour system settings
You can assign each input source a label as you
prefer.
NOTE
• You cannot change labels if the input source is “A-TV” or
“D-TV”.
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press
a
/
b
to select “Input label”, and then
press ENTER.
6
Labelling input sources
CH listTool
Menu
INPUT
:Exit:Enter
INPUT2
INPUT1
INPUT3
INPUT4
INPUT5
DVD
INPUT7
INPUT8
USB
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select“END”.
(Example)
8
Press
a
/
b/c/d
to select characters and
c
/
d
to move to the desired position to label
the input source.
• When you want to change the input label that you
have already assigned to the default name, press
c
/
d
to move to “CLEAR” on the “Input label”
screen, and then press ENTER.
7
SetupCH list
Menu
:Back:Enter
INPUT3(HDMI)
Input skip
Τerminal setting
INPUT1(HDMI)
Skip Input selection of HDMI
Yes No
This setting allows you to skip the HDMI or PC input
on the “Input Select” menu.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press
a
/
b
to select “Input skip”, and then
press ENTER.
5
Press
a
/
b
to select the Input (INPUT1 to
INPUT4 or INPUT8 (RGB)) you wish to skip.
6
Press
c
/
d
to select “Yes”.
7
Press MENU to exit.
8
Skipping HDMI/PC input
Press
b/c/d
to select “Option”.
4
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
5
Press
b/c/d
to select “Option”.
3
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
4
Press c/d to select “Setup”.
2
40LX710H_en.indd 4840LX710H_en.indd 48 2010/04/15 16:12:382010/04/15 16:12:38

Sharp LC-40LX710H Specifications

General

Brand	Sharp
Model	LC-40LX710H
Category	LCD TV
Language	English