Sharp LC-40LX710H User Manual

47
Settings when using external devices
Press TV/VIDEO on the remote control unit or
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a
/
b
.
2
Press TV/VIDEO on the remote control unit or
on the TV.
1
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Selecting the input source and
signal type
Press MENU and the MENU screen displays.
1
Press
b/c/d
to select “Option”.
3
Press
a
/
b
to select “Input select”, and then
press ENTER.
5
Selecting input signal type
For setting the signal type of external equipment.
Press
a
/
b
to select a signal type you want to
set, and then press ENTER.
6
NOTE
• If no colour image displays, try changing the other signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the type of the input
signal from a connected cable is automatically set up.
• When the signal type is set to “Auto” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 6: COMPONENT
s
S-VIDEO
s
VIDEO
INPUT 7: COMPONENT
s
VIDEO
Input source Selectable item
INPUT 6 Auto, COMPONENT, S-VIDEO, VIDEO
INPUT 7 Auto, COMPONENT, VIDEO
Press
c/d
to select “Setup”.
2
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
4
40LX710H_en.indd 4740LX710H_en.indd 47 2010/04/15 16:12:362010/04/15 16:12:36

Sharp LC-40LX710H Specifications

General

Brand	Sharp
Model	LC-40LX710H
Category	LCD TV
Language	English