Sharp LC-40LX710H

20
You can change channels in several ways.
Using CH
r
/
s
on the remote control unit
• Press CH
r
to increase the channel number.
• Press CH
s
to decrease the channel number.
NOTE
• CH
r
/
s
on the TV operates the same as CH
r
/
s
on
the remote control unit.
Using 0 - 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
To select a 3-digit channel (e.g. channel 123):
• Press 1, followed by 2 and 3.
Watching TV
20
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOL
e
.
• To decrease the volume, press VOL
f
.
NOTE
• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5”,
“INPUT6”, “INPUT7” “INPUT8” (PC) and USB modes can
store volume adjustment values separately.
Selecting programmes Adjusting the volume
(Example)
Channel display
D-TV
0
• If “Variable” is selected in “Setup”
s
“Option”
s
“Terminal
setting”
s
“Output volume select” in the menu, (See page
38) the screen will change to:
40LX710H_en.indd 2040LX710H_en.indd 20 2010/04/15 16:11:252010/04/15 16:11:25