Sharp MX-2600N Quick Start Guide

98
QUICKLY SAVING A JOB (Quick File)
As an example, the procedure for using "Quick File" while copying is explained below.
Quick File is the easiest way to save a file using the document filing function.
1 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2 Select settings in the touch panel.
Select settings in the same way as when making a regular
copy.
(1) Touch the [Quick File] key.
(2) Touch the [OK] key.
3 Set the number of copies and then press the
[COLOR START] key or the [BLACK & WHITE
START] key.
The file is stored on the hard drive at the same time as the
copy is made.
The side to be scanned must be face up!
OK
Scanned data is automatically stored
in the quick file folder. Do not store
confidential data to the folder.
Color Mode
Copy Ratio
100%
Original Paper Select
Auto
8½x11
Plain
Auto
8½x11
Full Color
Exposure
Auto
Plain
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
8½x11
Special Modes
2-Sided Copy
Output
File
Quick File
(2)
(1)
Cancel copying Correct sets Cancel scanning
06-1_Quick(DocumentFilling).fm 98 ページ ２００８年５月１４日 水曜日 午前８時３６分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg