Sharp MX-2600N Quick Start Guide

20
Changing the tray settings
When you change the paper in a tray, the tray settings in the system settings must also be changed.
1 Press the [SYSTEM SETTINGS] key.
2 Configure the tray settings in the touch panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Change] key in "Tray 1".
(4) Select [Recycled] from the "Type" select box.
(5) Select [8-1/2 X 11] from the "Size" select box.
For more information, see "Paper Tray Settings" in
"7. SYSTEM SETTINGS" in the Operation Guide.
(6) Touch the [OK] key.
The above steps change the paper settings for tray 1 to
8-1/2" x 11" recycled paper.
SYSTEM
SETTINGS
System Settings
Paper Tray Settings
Back
Tray Settings
Paper Type Registration
Auto Tray Switching
Custom Size Registration (Bypass)
OK
Cancel
System Settings
Tray Settings
Tray:
Type:
Size:
Paper Property:
Tray 1
Recycled
8-1/2x11
Admin Password
Exit
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
System Settings
Back
Change
Fixed Paper Side Disable Duplex Disable Staple Disable Punch
Type
Paper Property
Feeding Approved Job
Plain
8-1/2x14
Tray Settings
Size
Tray 1
Copy Print Fax I-Fax Doc. Filing
Print
Copy
I-Fax
Fax
Doc. Filing
(1)
(2)
(3)
(6)
(4)
(5)
01-1_Quick(General).fm 20 ページ ２００８年４月１日 火曜日 午前１０時５９分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg