Sharp MX-2600N Quick Start Guide

30
SELECTING THE EXPOSURE AND IMAGE
TYPE
You can specify the original image type to obtain a clearer copy.
The example of copying an original with light colors such as pencil
writing is explained below.
1 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2 Select settings in the touch panel.
(1) Touch the [Exposure] key.
(2) Touch the [Light Original] key.
(3) Darken the printed result with the key.
Nine levels are available for the exposure. Darken light
originals with the key, and lighten dark originals
with the key.
(4) Touch the [OK] key.
3 Set the number of copies and then press the
[COLOR START] key or the [BLACK & WHITE
START] key.
Light original
Exposure adjustment
The side to be scanned must be face up!
Color Mode
Copy Ratio
100%
Original Paper Select
Auto
8½x11
Plain
Auto
8½x11
Full Color
Exposure
Auto
1 53
Exposure
OK
Manual
Text/
Prtd.Photo
Photo
Text/Photo
Map
Text
Printed
Photo
Light
Original
Auto
Original Image Type
Plain
8½x11
Scan
Resolution
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
Special Modes
2-Sided Copy
Output
File
Quick File
(1)
(4)
(3)
(2)
Cancel copying Cancel scanning
Correct sets
02-1_Quick(Copy).fm 30 ページ ２００８年５月１４日 水曜日 午後１２時３５分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg