Sharp MX-2600N Quick Start Guide

36
STORING COPY OPERATIONS (Job Programs)
You can store a group of copy settings. The settings can be retrieved and used whenever needed.
When you frequently use the same group of settings, this saves you the trouble of manually selecting the settings
each time you need to use them.
Storing a job program
Using a job program
1 Press the [#/P] key ( ).
2 Select settings in the touch panel.
(1) Touch the [Store/Delete] tab.
(2) Touch the key in which you want to store a job
program.
Touch any key that is not highlighted.
Keys that have a job program stored are highlighted.
(3) Select the copy settings that you wish to store.
(4) Touch the [Program Name] key.
A text entry screen appears. Enter a name for the
program.
(5) Touch the [OK] key.
1 Press the [#/P] key ( ).
Place the original.
1 2 3
4
1
4
5 6
7 8 9
10 11 12
Exit
Job Programs
Press program number.
Recall Store/Delete
1 2 3
Recall Store/Delete
4
7
10 11 12
8 9
5 6
1
4
Exit
Job Programs
Press program number.
Color Mode
Copy Ratio
100%
Original Paper Select
Auto
8½x11
Plain
Auto
Full Color
Exposure
Auto
To store, make selections and press
[OK], to delete, press [Cancel].
Cancel OK
Plain
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
8½x11
Special Modes
2-Sided Copy
Output
Program Name
(1)
(2)
(5)
(3)
(4)
02-1_Quick(Copy).fm 36 ページ ２００８年５月１４日 水曜日 午後１２時３５分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg