Sharp MX-2600N Quick Start Guide

111
Printing on an envelopes
The procedure for printing on an envelope is explained below. Only the
name and address side of an envelope can be printed on.
It is recommended that you do a test print to check the print result before
using an envelope.
Type
Size
Fixed Paper Side
Disable Duplex
Paper Property
Bypass
Feeding Approved Job
Disable Staple
Disable Punch
Envelope
COM-10
Tray Settings
Copy
Print
Fax I-Fax
Doc. Filing
5
5
Change
Back
1 Place paper in the bypass tray. 2 Tray Settings.
Type : Envelope
Size : Select the envelope size
Print on the name
and address side
(1)
(2)
(3)
(4)
(5)
3 Select settings in the printer driver.
(2) Select the size of the envelope in
"Paper Size".
(3) Select "Bypass Tray" from "Paper
Source" in "Paper Selection".
(4) Select [Envelope] in "Paper Type".
If needed, select the "Rotate 180 degrees"
checkbox ( ) in "Image Orientation" on the
[Main] tab.
08-1_Quick(Trouble).fm 111 ページ ２００８年５月１９日 月曜日 午後４時４２分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg