Sharp MX-2600N Quick Start Guide

35
INTERRUPTING A COPY RUN
(Interrupt Copy)
When the machine is printing, you can temporarily interrupt the job and
perform a copy job that you wish to prioritize.
This feature is useful when you need to make an urgent copy during a
long copy run.
1 Touch the [Interrupt] key while the machine is
printing.
The [Interrupt] key appears in the base screen while the
machine is printing.
2 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
3 Set the number of copies and then press the
[COLOR START] key or the [BLACK & WHITE
START] key.
The interrupted copy job will resume when the copy job is
finished.
Printing
Interrupt
Original
Color Mode
Copy Ratio
100%
Original Paper Select
Auto
8½x11
Plain
Auto
Full Color
Exposure
Auto
Copies in progress from tray 2.
Ready to scan for next copy job.
7
Interrupt
Plain
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
8½x11
Special Modes
2-Sided Copy
Output
File
Quick File
The side to be scanned must be face up!
Cancel copying Cancel scanning
Correct sets
02-1_Quick(Copy).fm 35 ページ ２００８年５月１４日 水曜日 午後１２時３５分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg