Sharp MX-2600N Quick Start Guide

61
SENDING A FAX
The basic procedure for sending faxes is explained below.
In fax mode, color originals are sent as black and white images.
1 Touch the [IMAGE SEND] key.
The base screen of fax mode appears.
If the fax screen does not appear, touch the [Fax] tab.
2 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
3 Enter the fax number of the receiving fax
machine and press the [BLACK & WHITE
START] key.
In fax mode, the [COLOR START] key cannot be used to
send a fax.
Original
Transmission result
Transmission
Auto Auto
Auto
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Special Modes
Resolution
Exposure
Original
Scan:
Scan
Send:
Standard
Auto Reception
Fax Memory:100%
Speaker
Ready to send.
Resend
IMAGE SEND
DOCUMENT
FILING
COPY
The side to be scanned must be face up!
Cancel scanningCorrect a mistake
04-1_Quick(Fax).fm 61 ページ ２００８年５月１４日 水曜日 午前８時３３分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg