Sharp MX-2600N Quick Start Guide

81
BASE SCREEN OF SCAN MODE
Touch the [IMAGE SEND] key in the touch panel to open the base screen of scan mode. If the scan screen does
not appear, touch the [Scan] tab.
Select various scan settings in the base screen.
(1) Send mode tabs
Use these keys to change the mode of the image
send function. To switch to scan mode, touch the
[Scan] tab.
(2) [Address Book] key
Touch this key to use a one-touch key or a group key.
When the key is touched, the address book screen
appears.
(3) [Address Entry] key
Touch this key to manually enter a destination
address instead of using a one-touch key.
(4) [Send Settings] key
Touch this key to select or enter the subject, file
name, sender name, or message text, which have
been previously stored in the Web page.
(5) Customized keys
The keys that appear here can be changed to show
settings or functions that you prefer.
(6) key
Touch this key to specify a destination using a search
number
*
.
* 3-digit number assigned to a destination when it is
stored.
(7) [Resend] key / [Next Address] key
The destinations of the most recent eight
transmissions by Scan to E-mail, fax and/or Internet
fax (including Direct SMTP addresses) are stored. To
select one of these destinations, touch the desired
destination. After a destination is selected, this key
changes to the [Next Address] key.
(8) Image settings
Image settings (original size, exposure, resolution, file
format, and color mode) can be selected.
(9) key
This key appears when a special mode or 2-sided
scanning is selected. Touch the key to display the
selected special modes.
(10) [Special Modes] key
Touch this key to use a special mode.
Auto Auto
Auto
File
Quick File
Address Review
Send Settings
Address Entry
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Resend
Special Modes
Color Mode
File Format
Resolution
Exposure
Original
Scan:
Scan
Send:
200X200dpi
PDF
Auto/Grayscale Mono2
PDF
Ready to send.
(1)
(5)
(6)
(2)
(3)
(4)
(7)
(8)
(9)
(10)
05-1_Quick(Scanner).fm 81 ページ ２００８年４月２日 水曜日 午後６時５９分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg