Sharp MX-2600N

29
MAKING COLOR COPIES (Color Mode)
When color and black & white originals are mixed together, you can
have the machine automatically detect whether each original is color
or black & white and make each copy accordingly.
The procedure for copying with the color mode set to "Auto" for
automatic detection of color and black & white is explained below.
1 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2 Select settings in the touch panel.
(1) Touch the [Color Mode] key.
(2) Touch the [Auto] key.
(3) Touch the [OK] key.
3 Set the number of copies and press the
[COLOR START] key.
Original Copy
The side to be scanned must be face up!
Color Mode
Copy Ratio
100%
Original Paper Select
Auto
8½x11
Plain
Auto
8½x11
Full Color
Exposure
Auto
Color Mode
OK
Full Color
Auto 2 Color
Single Color
Plain
8½x11
Special Modes
2-Sided Copy
Output
File
Quick File
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
(1)
(2)
(3)
Cancel copying Cancel scanning
Correct sets
02-1_Quick(Copy).fm 29 ページ ２００８年５月１４日 水曜日 午後１２時３５分