Sharp MX-2600N Quick Start Guide

105
System settings (administrator)
The system settings (administrator)* are system settings that can only be configured by the administrator of the
machine. To configure these settings, the administrator password must be entered.
However, when user authentication is enabled, users who log in with certain user rights may be able to configure
these settings without entering the administrator password. Check with your administrator.
* Although the manuals for the machine indicate system settings that require administrator rights as "system
settings (administrator)", this is only for convenience in explaining the settings. The word "administrator" does
not appear in the touch panel or elsewhere on the machine.
For the items of the system settings (administrator), see "7. SYSTEM SETTINGS" in the Operation Guide. (You
can also refer to the "SYSTEM SETTINGS MENU" on the next page.)
mx3100_us_qck.book 105 ページ ２００８年３月１５日 土曜日 午後６時３０分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg