Sharp MX-C312 User Manual

1-59
BEFORE USING THE MACHINE
Contents
REPLACING THE DRUM CARTRIDGE
Your service technician will replace the drum cartridge. Only replace the cartridge as explained below if your service
technician instructs you to. Follow the instructions carefully.
• Do not leave the drum cartridge outside of its package for a long time, and do not remove cartridge from its
package in a location where there is bright sunlight or bright light. This may cause a failure.
• When you remove a drum cartridge, place it in a dark location and do not allow light to shine on the cartridge.
1
Turn off the power and remove the developer cartridge.
For the procedure for removing the developer cartridge, see steps 1 to 4 of "REPLACING THE DEVELOPER CARTRIDGE"
(page 1-55).
To remove the drum cartridge, the developer cartridge must first be removed.
2
Hold down the lever on the drum
cartridge with your finger and pull the
drum cartridge toward you.
Place one hand at the middle of the drum cartridge and pull out
with both hands.
Do not touch toner on the old drum cartridge. If you accidentally touch the toner, immediately wash your hands.
Developer cartridge
Drum cartridge

Sharp MX-C312 Specifications

Power

power consumption	1.44 kW or less
power source	AC 100-127VAC, 60HZ, 12 AMPS

Copying Features

copy speed	31 ppm B&W/Color
first copy time	8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time	90 seconds or less

Scanning Features

scan speed	Up to 35 ipm (B&W or color)
optical resolution	600 dpi
output modes	600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi

Network Printing System

print resolution	1200 dpi, 600 dpi
print speed	31 pages per minute (Letter)
resident fonts	80 Outline Fonts

Inner Finisher

output capacity	Up to 280 sheets (Letter/Legal)
weight	Approx. 19.8 lbs
dimensions	18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)

Weight and Dimensions

weight	102 lbs
dimensions	22-3/64" x 17-1/4" x 28-7/64"