Sharp MX-C312 User Manual

7-5
SYSTEM SETTINGS
Contents
This section describes the system settings that can be configured by general users of the machine.
Accessing the System Settings (General)
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
SYSTEM SETTINGS (GENERAL)
JOB STATUS
IMAGE SEND
HOME
PRINT
READY
DATA
DATA
LINE
SYSTEM
SETTINGS
LOGOUT
System Settings
ExitAdmin Password
Total Count Default Settings
Address Control
USB-Device Check
List Print
(User)
Fax Data
Receive/Forward
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see "USER AUTHENTICATION" (page 1-17) in
"1. BEFORE USING THE MACHINE".

Sharp MX-C312 Specifications

Power

power consumption	1.44 kW or less
power source	AC 100-127VAC, 60HZ, 12 AMPS

Copying Features

copy speed	31 ppm B&W/Color
first copy time	8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time	90 seconds or less

Scanning Features

scan speed	Up to 35 ipm (B&W or color)
optical resolution	600 dpi
output modes	600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi

Network Printing System

print resolution	1200 dpi, 600 dpi
print speed	31 pages per minute (Letter)
resident fonts	80 Outline Fonts

Inner Finisher

output capacity	Up to 280 sheets (Letter/Legal)
weight	Approx. 19.8 lbs
dimensions	18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)

Weight and Dimensions

weight	102 lbs
dimensions	22-3/64" x 17-1/4" x 28-7/64"