Sharp MX-C312 User Manual

1-49
BEFORE USING THE MACHINE
Contents
This section explains the procedures for replacing supplies such as toner and staple cartridges and routine
maintenance.
REPLACING THE TONER CARTRIDGES
Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.
In copy mode
REPLACING SUPPLIES AND
MAINTENANCE
1
Open the front cover.
Locations of colour toner cartridges
OK
Change the toner cartridge.
( )
Ready to scan for copy.
( Change the toner cartridge.)
When the message appears in the message display, replace the
toner cartridge for the indicated colour.
If you continue to use the machine without replacing the cartridge,
the following message will appear when the toner runs out.
Colours that are running low or have run out of toner are indicated in ( ).
: Yellow toner, : Magenta toner, : Cyan toner, : Black toner
Replace the toner cartridges of the indicated colours.
Y
M C
Bk
(M)(Y) (C) (Bk)
(Y): Yellow (M): Magenta
(C): Cyan (Bk): Black

Sharp MX-C312 Specifications

Power

power consumption	1.44 kW or less
power source	AC 100-127VAC, 60HZ, 12 AMPS

Copying Features

copy speed	31 ppm B&W/Color
first copy time	8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time	90 seconds or less

Scanning Features

scan speed	Up to 35 ipm (B&W or color)
optical resolution	600 dpi
output modes	600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi

Network Printing System

print resolution	1200 dpi, 600 dpi
print speed	31 pages per minute (Letter)
resident fonts	80 Outline Fonts

Inner Finisher

output capacity	Up to 280 sheets (Letter/Legal)
weight	Approx. 19.8 lbs
dimensions	18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)

Weight and Dimensions

weight	102 lbs
dimensions	22-3/64" x 17-1/4" x 28-7/64"