EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
1-36
BEFORE USING THE MACHINE
Contents
This section explains how to place originals in the automatic document feeder and on the document glass.
PLACING THE ORIGINAL
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞ 2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-29)
☞ 4. FACSIMILE "IMAGE SETTINGS" (page 4-44)
☞ 5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-49)
Allowed original weights
To scan originals from 35 g/m
2
to 49 g/m
2
(9 lbs. to 14 lbs.), use "Slow Scan Mode" in the special modes. Scanning
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
Originals that cannot be fed through the automatic document feeder
Do not use the following originals. Original misfeeds, and smudges may result.
• Transparency film
• Tracing paper
• Carbon paper
• Thermal paper or originals printed with thermal transfer ink ribbon
• Originals to be fed through the feeder should not be damaged, crumpled, folded, loosely pasted together, or have
cut-out holes
• Originals with multiple punched holes other than two-hole or three-hole punched paper
• Originals that have been scanned multiple times in the automatic document feeder and have become creased or
folded.
• Originals that have absorbed moisture and become soft.
ORIGINALS
Minimum original size Maximum original size
Standard sizes
A5: 148 mm (height) x 210 mm (width)
5-1/2" (height) x 8-1/2" (width)
Non-standard sizes
(Minimum size that can be specified manually)
1-sided scanning: 100 mm (height) x 89 mm (width)
(4" (height) x 3-1/2" (width))
2-sided scanning: 100 mm (height) x 148 mm (width)
(4" (height) x 5-7/8" (width))
Standard sizes
A4: 210 mm (height) x 297 mm (width)
8-1/2" (height) x 14" (width)
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 216 mm (height) x 356 mm (width)
8-1/2" (height) x 14" (width)
Image send mode: 216 mm (height) x 500 mm (width)
8-1/2" (height) x 19-5/8" (width)
1-sided scanning 35 g/m
2
to 128 g/m
2
(9 lbs. to 32 lbs.)
2-sided scanning 50 g/m
2
to 105 g/m
2
(13 lbs. to 28 lbs.)

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals