EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
1-34
BEFORE USING THE MACHINE
Contents
IMPORTANT POINTS WHEN USING THE BYPASS TRAY
• When using plain paper other than SHARP standard paper or special media other than SHARP-recommended
transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet
at a time. Loading more than one sheet at a time will cause misfeeds.
• Before loading paper, straighten any curling in the paper. If curled paper is not straightened, a misfeed may occur.
• When adding paper, remove any paper remaining in the bypass tray, combine it with the paper to be added, and
reload as a single stack. If paper is added without removing the remaining paper, a misfeed may result.
Inserting paper
Inserting transparency film
Place paper in the horizontal orientation.
• Use SHARP-recommended transparency film. When using
transparency film, place the film on the bypass tray with the rounded
corner at the left front. This ensures that the print side faces in the
correct direction.
• Do not touch the print side of transparency film.
• When loading multiple sheets of transparency film in the bypass tray,
be sure to fan the sheets several times before loading.
• When printing on transparency film, be sure to remove each sheet as it
exits the machine. Allowing sheets to stack in the output tray may result
in curling.

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals