EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
3-6
PRINTER
Contents
SELECTING THE PAPER
This section explains how to configure the "Paper Selection" setting on the [Paper] tab of
the printer driver properties window.
Before printing, check the paper sizes, paper types, and paper remaining in the machine's
trays. To view the most recent tray information, click the [Tray Status] button.
• When [Auto Select] is selected in "Paper Source"
The tray that has the size and type of paper selected in "Paper Size" and "Paper Type" on the [Paper] tab is
automatically selected.
• When other than [Auto Select] is selected in "Paper Source"
The specified tray is used for printing regardless of the "Paper Size" setting.
When [Bypass Tray] is selected
The "Paper Type" must also be selected. Check the bypass tray and make sure that the desired type of paper is
loaded, and then select the appropriate "Paper Type" setting.
• When [Auto Select] is selected in "Paper Type"
A tray with plain paper or recycled paper of the size specified in "Paper Size" is automatically selected. (The factory
default setting is plain paper only.)
• When other than [Auto Select] is selected in "Paper Type"
A tray with the specified type of paper and the size specified in "Paper Size" is used for printing.
• Special media such as envelopes can also be placed in the bypass tray. For the procedure for loading paper and other
media in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" (page 1-33) in "1. BEFORE USING THE
MACHINE".
• When "Enable Detected Paper Size in Bypass Tray" (disabled by factory default) or "Enable Selected Paper Type in
Bypass Tray" (enabled by factory default) is enabled in the system settings (administrator), printing will not take place if the
paper size or paper type specified in the printer driver is different from the paper size or paper type specified in the settings
of the bypass tray.
System Settings (Administrator): Exclude Bypass-Tray from Auto Paper Select
When [Auto Select] is selected in "Paper Selection", specify whether or not the paper in the bypass tray will be excluded from
the paper that can be selected. This setting is disabled by factory default, and thus paper in the bypass tray is included in the
paper that can be automatically selected. If special media are frequently loaded in the bypass tray, it is recommended that
this setting be enabled.

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals