Sharp MX-C312 User Manual

2-92
COPIER
Contents
4
Set the number of copies (number of
sets) with the numeric keys.
If you will copy multiple originals using the document glass,
switch to sort mode after this step.
☞ Sort mode (page 2-35)
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
One set of copies is printed.
If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all
pages have been scanned and then touch the [Read-End] key. One set of copies will be printed. (For the second original and
following originals, use the same [START] key as you did for the first original.)
To cancel copying...
Press the [STOP] key ( ).
6
Check the printed set of copies. If the
copies are acceptable, touch the [End]
key. If you need to change the settings,
touch the [Change] key.
When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.
To cancel copying...
Press the [STOP] key ( ).
Plain
7
A4
Special Modes
2-Sided Copy
EndChange
Press [End] to continue.
To make a proof copy again, press
[Start].

Sharp MX-C312 Specifications

Power

power consumption	1.44 kW or less
power source	AC 100-127VAC, 60HZ, 12 AMPS

Copying Features

copy speed	31 ppm B&W/Color
first copy time	8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time	90 seconds or less

Scanning Features

scan speed	Up to 35 ipm (B&W or color)
optical resolution	600 dpi
output modes	600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi

Network Printing System

print resolution	1200 dpi, 600 dpi
print speed	31 pages per minute (Letter)
resident fonts	80 Outline Fonts

Inner Finisher

output capacity	Up to 280 sheets (Letter/Legal)
weight	Approx. 19.8 lbs
dimensions	18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)

Weight and Dimensions

weight	102 lbs
dimensions	22-3/64" x 17-1/4" x 28-7/64"