EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #499 background imageLoading...
Page #499 background image
5-34
SCANNER/INTERNET FAX
Contents
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one
page, go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will begin. Go to step 8.
Do not disconnect the USB memory until "Sending data has been completed." appears in the touch panel.
• To scan in full colour, press the [COLOUR START] key. To scan in black and white, press the [BLACK & WHITE
START] key. If the colour mode of the [COLOUR START] key is set to [Auto], the colour of the original will be
detected automatically and scanning in full colour, greyscale or Mono2 will take place.
• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key is pressed.
Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the
[OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file
type. Select a new file type and press the [START] key to begin transmission.
6
If the original was placed on the document glass, replace it with the next original
and press the [COLOUR START] key or the [BLACK & WHITE START] key.
Repeat until all originals have been scanned.
7
Touch the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original
page scanned. However, when "Card Shot" is selected in the special modes, only the exposure can be changed
when scanning an even-numbered original page.
EntryCancel
Please enter encrypt PDF
password.
Read-EndConfigure
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End].

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals