EasyManua.ls Logo

Sharp  MX-C312 - Page 519

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-54
SCANNER/INTERNET FAX
Contents
4
Enter the scan size (original size).
(1) Enter the X (horizontal) dimension of the
original.
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, enter a
number from 25 mm to 297 mm (1" to 11-5/8").
When the automatic document feeder is used, enter a
number from 89 mm to 356 mm (3-1/2" to 14").
When a number which is from 139 mm (5-3/8") and less is
entered in 2-Sided scanning setting, an original cannot be
scanned.
If the horizontal dimension of the original is less than
89 mm (3-1/2"), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, enter a
number from 25 mm to 216 mm (1" to 8-1/2").
When the automatic document feeder is used, enter a
number from 100 mm to 216 mm (4" to 8-1/2").
If the vertical dimension of the original is less than
100 mm (4"), use the document glass.
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete
the setting and return to the screen of step 3.
When a number from 298 mm to 356 mm (11-3/4" to 14") to the X (horizontal) dimension and a number from 25 mm
to 99 mm (1" to 3-7/8") to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
You can also touch the keys to change the number.
5
Touch the [OK] key.
The specified size appears in the [Scan Size] key.
When the scan size is specified by numerical values, the send size cannot be specified.
When the automatic document feeder is used, an original longer than 297 mm (11-5/8") can be scanned (maximum width
500 mm (19-5/8")). In this case, touch the [Long Size] key in the screen of step 3.
Specifying the original scan size (by paper size) (page 5-52)
Size Input
Scan/Original
OK
OKCancel
297
X
Y
210
(50 216)
mm
(50 356)
mm
(1), (2) (3)
Scan/Original
OK
Auto
X297 Y210
Scan Size
2-Sided
Tablet
2-Sided
Booklet
Send Size
Image Orientation

Table of Contents

Other manuals for Sharp  MX-C312

Related product manuals