EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #539 background imageLoading...
Page #539 background image
5-74
SCANNER/INTERNET FAX
Contents
4
Specify the original size.
(1) Enter the original size.
• Touch the X (width) numeric value display key and
enter the width.
• Touch the Y (height) numeric value display key and
enter the height.
(A) To return the original size to the default size, touch the
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the
send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.
(2) Touch the [OK] key.
• You can also touch the keys to change the number.
• The send size will be selected automatically based on the entered original size.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, the screen of this step appears when you touch the scan size key. For the procedure for
setting the send size, see "Specifying the send size of the image" (page 5-55).
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Turn the card over and press the [COLOUR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Press the same [START] key that was used to scan the front side.
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
Scan/Special Modes
OK
X
Y
Card Shot
OK
Cancel
Fit to
Send Size
Size Reset
(25~210)
mm
(25~210)
mm
86
54
(2)(B)(1)
(A)
X
Y

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals