EasyManuals Logo

Sharp  MX-C312 User Manual

Sharp MX-C312
793 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
1-57
BEFORE USING THE MACHINE
Contents
6
Insert the new developer cartridge
horizontally.
Insert the new developer cartridge in the same location as the
cartridge that was removed.
• Do not tilt the developer cartridge or insert it in the wrong direction or orientation. This may damage the developer
cartridge or drum cartridge and cause failure.
• When inserting the developer cartridge, grasp it with both hands at the middle.
• Do not remove the seal from the developer cartridge until the cartridge is installed in the machine. If the seal is
removed when the cartridge is not locked, the cartridge may fall out of the machine.
Insert with the arrow on the cartridge aligned with the arrow on the machine.
7
Peel the seal edge off from the developer
cartridge.
Align the V-shape cut out of the seal with the attachment tab
while peeling it off.
Take care not to peel the seal off completely.
8
Grasp the developer cartridge lock and
replace it on the machine.
9
Hold the developer cartridge with one
hand and slowly remove the seal with
the other hand.
Slowly pull the seal straight and horizontally out.
If excessive force is used or the seal is pulled out diagonally, it may tear.
There is a mark (red belt) on the end of the seal. After removing the seal, be sure to verify that the mark (red belt) is on
the end of the seal.
If the seal has been cut on the developer cartridge, the cartridge cannot be used. Replace with a new developer
cartridge.

Table of Contents

Other manuals for Sharp  MX-C312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp  MX-C312 and is the answer not in the manual?

Sharp  MX-C312 Specifications

Power IconPower
power consumption1.44 kW or less
power sourceAC 100-127VAC, 60HZ, 12 AMPS
Copying Features IconCopying Features
copy speed31 ppm B&W/Color
first copy time8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time90 seconds or less
Scanning Features IconScanning Features
scan speedUp to 35 ipm (B&W or color)
optical resolution600 dpi
output modes600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi
Network Printing System IconNetwork Printing System
print resolution1200 dpi, 600 dpi
print speed31 pages per minute (Letter)
resident fonts80 Outline Fonts
Inner Finisher IconInner Finisher
output capacityUp to 280 sheets (Letter/Legal)
weightApprox. 19.8 lbs
dimensions18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)
Weight and Dimensions IconWeight and Dimensions
weight102 lbs
dimensions22-3/64" x 17-1/4" x 28-7/64"

Related product manuals