11
MAKING COPIES
3
Enter the desired number of copies.
●
If the specified number of copies is more than 50, the copy
quantity display will display 50 after copying starts. If an
optional sorter is installed, the display will change to 20 after
copying starts (in sort mode).
4
Press the START key.
●
To cancel a copy run during duplex copying, press the clear
( ) key. Incomplete copies will be output from the duplex
tray.
1
2
1
1-sided copies from 2-sided originals
1
Adjust the original guides to the size of the originals
and set the originals face up in the document feeder
tray.
2
Use the ORIGINAL TO COPY key to select .
3
Enter the desired number of copies.
4
Press the START key.
●
To cancel a copy run, press the clear ( )key. Copying will
stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset
to 0.
USING THE RADF
Using the RADF
PRE-COUNT
ORIGINALS
EVEN NUMBER
ODD NUMBER
2
2
2
11
(ORIGINALS)
PRE-COUNT
ORIGINALS
ODD NUMBER
2
2
2
11
START
123
456
7
8
9
C
0/
AUDIT CLEAR
START
123
456
7
8
9
C
0/
AUDIT CLEAR
To Next Page
Loading...
