91
OPTIONAL
EQUIPMENT
SF-S55N 20-bin staple sorter
1
Open the front cover of the staple sorter.
2
Squeeze the green lever of the grip and hold the grip to
pull out the staple unit.
3
Pull the empty staple box up and out to remove it.
●
Do not remove the staple cartridge unless the message “ADD
STAPLES. FOLLOW INSTRUCTIONS INSIDE THE
SORTER.” is displayed. Doing so will cause the stapler to jam.
4
Push the green button and remove the thick paper
from inside the staple box.
5
Insert the new staple cartridge into the box until it
clicks in place.
●
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place
by pulling it slightly.
●
The cartridge holds 5,000 staples.
NOTE:
Be sure not to remove the rear paper and tape before inserting
the cartridge.
20-BIN STAPLE SORTER (SF-S55N)
Green lever
20-bin staple sorter (SF-S55N)
To Next Page
Loading...
