92
OPTIONAL
EQUIPMENT
6
Remove the rear paper and tape from the cartridge.
●
Pull them straight. If they are pulled obliquely, the tape may be
torn.
7
Insert the staple box into the stapler until it clicks in
place.
8
Gently push back the staple unit until it clicks.
9
Close the front cover of the staple sorter.
10
Place a sheet of paper into the bin below the non-sort
bin. Press the STAPLING START/STOP key on the
staple sorter when it lights up.
●
Check to see whether the sheet is stapled.
If it is not stapled, press the STAPLING START/STOP key
again.
●
If the stapler does not operate properly even after
replacement, a staple may be jammed in it. See page 95.
●
Staples for the staple sorter are available from your Sharp
dealer.
20-BIN STAPLE SORTER (SF-S55N)
20-bin staple sorter (SF-S55N)
To Next Page
Loading...
