<P=003>
6
Enter the name of the party by pressing the number keys as shown in the
chart below. Up to 10 characters can be entered. (See Step 6 in "Entering
Your Name and Fax Number" in Chapter 1 for more details.)
•
••
• If you don’t want to enter a name, skip this step.
•
••
• To enter two letters in succession that require the same key, press the
SPEAKER key after entering the first letter.
Example: SHARP = 7 7 7 7 7 4 4 4 2 2 7 7 7 7 7 7
7
Press the START key.
8
Return to Step 3 to store another number, or press STOP to exit. If the
number will be used for Rapid Key Dialing, you can write the name on the
appropriate Rapid Key label.
Step 3 or
START
STOP
Storing area codes and access codes
You can also store an area code or access code in a Rapid Key or Speed Dial
number. To use this number to dial, see "Chain Dialing" in Chapter 5,
"Making Telephone Calls".
Note: An area code or access code stored in a Rapid Key or Speed Dial
number can only be used if the handset is lifted or the SPEAKER key
pressed before dialing.
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
SPEAKER
Sending a Fax by Automatic Dialing
32
To Next Page
Loading...
Need help?
General
