Sharp XE-A207B

79

■
Creditkey(Credit1,Credit2)
Procedure
Program each item as follows:
Select a pertinent credit key from
the credit keys list.
The screen continues.
•TEXT(Usethecharacterentry)
Description for the credit key. Up to 12 characters can be
entered.
•HALO(HighAmountLockout)(Usethenumericentry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0 to 999999.99
•FOOTERPRINT(Usetheselectiveentry)
This item decides whether or not your register should print a
message at the foot of a receipt when a specied credit key is
used.
YES: Enables footer printing on the receipt.
NO: Disables footer printing on the receipt.
•TEND(Usetheselectiveentry)
COMPULSORY: Compulsory amount tendered entry.
NON-COMPUL.: Non-compulsory amount tendered entry.

■
Foreigncurrency(Exchange1,Exchange2)
Procedure
Program each item as follows:
Select a pertinent currency
exchange key from the currency
exchange keys list.
•PRESETRATE(Usetheselectiveentry)
ENABLE: Enables preset rate
DISABLE: Disable preset rate
•RATE(Usethenumericentry)
Currency exchange rate (0.000000 to 999.999999)
•TEXT(Usethecharacterentry)
Description for the currency exchange key. Up to 12
characters can be entered.
•SYMBOL(Usethecharacterentry)
Currency descriptor. Up to 4 characters can be entered.
•TAB(Usethenumericentry)
Tabulation (0 to 3)
•OPENRATE(Usetheselectiveentry)
ENABLE: Enables open rate
DISABLE: Disable open rate
NOTE
Currency symbol is printed with (+) amount of foreign currency.
The programmed character is printed at left side of amount.
EX) Case of “DM”:
EXCH1 1.234567
DM1.23
Programmed symbol