EasyManua.ls Logo

Sharp XE-A207B

Sharp XE-A207B
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
ComputationofVAT(ValueAddedTax)/Tax
VAT/taxsystem
The cash register may be programmed for the following six VAT/tax systems. The cash register is pre-
programmed as automatic VAT 1-4 system.
AutomaticVAT1through4system(Automaticoperationmethodusingprogrammedpercentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by
using the corresponding programmed percentages.
Automatictax1through4system(Automaticoperationmethodusingprogrammedpercentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by
using the corresponding programmed percentages, and also adds the calculated taxes to those subtotals,
respectively.
ManualVAT1through4system(Manualentrymethodusingprogrammedpercentages)
Procedure
z
select “VAT”
3
t
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when “VAT” from the function
menu is selected just after the
z
key.
ManualVAT1system(ManualentrymethodforsubtotalsthatusesVAT1presetpercentages)
Procedure
A
VAT rate
To use a programmed rate
z
select “VAT”
3
t
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT
1 preset percentages when “VAT” from the function menu is selected just after the
z
key. For this
system, the keyed-in tax rate can be used.
Manualtax1through4system(Manualentrymethodusingprogrammedpercentages)
Procedure
z
select “VAT”
3
t
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when “VAT” from the function
menu is selected just after the
z
key. After this calculation, you must nalize the transaction.
AutomaticVAT1andtax2through4
This system enables the calculation in the combination with automatic VAT 1 and tax 2 through 4. This
combination can be any of VAT 1 and tax 2 through 4. The tax amount is calculated automatically with the
percentages previously programmed for these taxes.

Table of Contents

Other manuals for Sharp XE-A207B

Related product manuals