Sharp XE-A207B

108

■
Dataloading
The programming data can be loaded from the SD card.
Procedure
(1) Select “2 LOADING” in the SD CARD mode, the selection window
“IND. PROGRAM/ ALL PROGRAM” is
displayed.
Text Data list
IND. PROGRAM
Select the individual programming data:
DEPARTMENT,
PLU,
GRAPHIC LOGO
LOGO TEXT
TAX
ALL PROGRAM All programming data
ALL RAM DATA* All RAM data
(2) Select the data menu from the list and press the
A
key, the conrmation window is displayed.
To load the programming data le, select OK and press the
A
key.
To cancel the operation, select CANCEL and press the
A
key.
* When “ALL RAM DATA” is selected, the register resets the program after loading all the RAM data.