Sharp XE-A207B

127
CleaningthePrinter(PrintHead/Sensor/Roller)
When the printed text is getting dark or faint, paper dust may be stuck to the print head, sensor and/or roller.
Clean them as follows:
Caution:Nevertouchtheprintheadwithatooloranythinghardasitmaydamagethehead.
 Thepapercutterismountedontheprintercover.Becarefulnottocutyourself.
1.
Select the OFF mode.
2.
Remove the printer cover.
3.
Life up the printer roll arm.
4.
Remove the paper roll referring to the “Removing the
paper roll” section.
5.
Clean the print head with a cotton swab or soft rag
moistened with ethyl alcohol or isopropyl alcohol.
Clean the roller and the sensor in the same manner.
6.
Reset the paper roll correctly by following the steps in
“Installing the paper roll.”
Printer head
Sensor
Roller