Sharp XE-A207B

63
HowtoProgramAlphanumericCharacters
This section discusses how to program alphanumeric characters such as “DESCRIPTION,” “NAME” and
“TEXT.”

■
Mobilephonemethod(XE-A207W/XE-A207Bonly)
Enteringalphanumericcharacters
To enter a character, simply press a corresponding character key on the programming keyboard.
To enter “A”, press the “8” key.
To enter “B”, press the “8” key twice.
To enter “C”, press the “8” key three times.
Enteringdouble-sizecharacters
W
: This key toggles the double-size character mode and the normal-size character mode. The default
is the normal-size character mode. When the double-size character mode is selected, the letter “W”
appears at the bottom of the display.
Enteringupper-caseletters
H
: You can enter an upper-case letter by using this key. Press this key just before you enter the upper-
case letter. You should press this key each time you enter an upper-case letter.
Tomovethecursor
: ;
: Moves the cursor.
Todeleteacharacterorgure
D
: Deletes a character or gure in the cursor position.

■
PCkeyboardmethod(XE-A217W/XE-A217B)
(Keysheetlayout)
To enter a character using the primary character are located on PLU direct key area.
Enteringdouble-sizecharacters
W
: This key toggles the double-size character mode and the normal-size character mode. The default
is the normal-size character mode. When the double-size character mode is selected, the letter “W”
appears at the bottom of the display.
Enteringupper-caseletters
H
: You can enter an upper-case letter by using this key. Press this key just before you enter the upper-
case letter. You should press this key each time you enter an upper-case letter.
Tomovethecursor
: ;
: Moves the cursor.
Todeleteacharacterorgure
D
: Deletes a character or gure in the cursor position.