Sharp XE-A207B

100
MessageProgramming
Use the following procedure to select any option included in the message group:
Procedure
1.
In the SETTING window, select “10 MESSAGE.”
• The MESSAGE window will appear.
2.
Select any option from the following options list:
1 RECEIPT LOGO
Receipt logo
2 E.BILL MESSAGE
Entertainment bill message
The following illustration shows those options included in this programming group.
10 MESSAGE 1 RECEIPT LOGO
l
See “Receipt logo” this page.
2 E. BILL MESSAGE
l
See “E. Bill message” on page 101.

■
Receiptlogo
Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.
Procedure
Program each item as follows:
•RECEIPTLOGO(Usethecharacterentry)
Logo text for the receipt (max. 30 characters x 6 lines)
Entering sequential characters “=” will print the corresponding
clerk name in the footer logo message. Enter 12 characters “=.”
NOTE
The programmable number of lines for a message varies according to the following message
types:
• 3-line header message type
• Graphical logo only type
• 3-line footer message type
• 6-line header message type