Sharp XE-A207B

99
•RESETGT(Usetheselectiveentry)
YES: Reset the GT
NO: Not to reset the GT

■
Hourlyreport
You can program the memory type and the starting time for the hourly report.
Procedure
Program each item as follows:
•MEMORYTYPE(Usetheselectiveentry)
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
•STARTTIME(Usethenumericentry)
Starting time entry (max. 2 digits: 0 to 23)

■
E.Journal
•STORETOSD
When the EJ data is recorded on the SD card:
W SPACE: Control characters are recorded double space.
AS IS: Control characters are recorded as they are
•TRDATASTORE
YES: Record the EJ data in the training mode.
NO: Not to record the EJ data in the training mode.
•XDATASTORE
When the X report data in the EJ is recorded:
DETAIL: Record the detail of X report in the electronic journal
HEADER: Record only the header of X report in the electronic journal