CHAPTER 3:
HancomMobileSheet
55
Tools Menu
Protection
This prevents any change to a cell or any designated area of the sheet, or to
an entire document.
•
Protect sheet
To prevent any new values from being
added to the sheet, tap the menu
[Tools-Protect sheet...]. You can select
the protection type. If you select [Cell],
no data in the cells can be edited.
If you select [Item], nothing including any
charts can be edited.
A protected sheet cannot be deleted. A
password can also be applied.
[Tools-Unprotect sheet] will be seen
when the sheet is protected. Selecting
this menu will remove the protection.
Recalculate/Manual Calculation
If many cells have an equation input, it can take a long time to carry out the
calculations. If there are many equations, select either the automatic or
manual calculation option to carry out the entire recalculation process. With
the automatic option, calculations are immediately carried out as soon as the
cell information changes.
With the manual option, tap the [Tools-Recalculate] menu to calculate the
total. Therefore before recalculation, the previous information will be indicated
in the cell. If the file is saved in a manual calculation state, recalculation will
be carried out to update the equation results, then saved.
To Next Page
Loading...
Need help?
General
