Shure DCS 6000 - Loudspeaker;Headphone Audio Sources

41
Audio Source for the Loudspeaker and Headphones
By default all microphones are routed to loudspeaker and headphone mixes.
To change the audio source:
1. Route microphones to Group A to add them to the floor mix (all selected by default) Audio > Group Setup
Group A = Floor
2. Select the audio sources for the loudspeaker and Channel 0 (headphone) Audio > Input Control:
• Floor (default)
• Audio In 1
• Audio In 2
Loudspeaker
Headphone