67
Technical Specifications
DCS 6000 System
The microphone system conforms to IEC 60914, the
international standard for conference systems. However the
functionality of an Interpreter Unit differs from the standard.
Audio performance specifications are measured from the
audio input of a conference unit to the headphone output of
a conference unit.
System Audio Performance
Audio quality 24 bit audio @ 32 kHz
sampling frequency
Audio frequency
response
65 Hz - 16 kHz (-3 dB)
Total harmonic distortion
at 1 kHz
< 0.1%
Dynamic range > 80 dB
Weighted signal-to-noise
ratio
> 85 dB(A)
Cabling and System Limits
Cable type (min.
specification)
Cat5e, AWG 24,
screened, shielded
Maximum cable length CU only: 200 m
With repeater units: 680
m
System Environmental Conditions
Working condition Fixed, stationary or
transportable
Temperature Range
To guarantee specified
performance
5 Deg C. to 40 Deg C.
Storage temperature -20 Deg C. to 60 Deg C
Maximum relative
humidity
< 80%
Approvals
EMC emission According to harmonized
standard EN 55103-
1 and FCC rules part
15, complying with the
limits for a class B digital
devices
EMC immunity According to harmonized
standard EN 55103-2
EMC approvals Affixed with the CE mark
ESD According to harmonized
standard EN 55103-2
Mains harmonics According to harmonized
standard EN 55103-1
Environmental
requirements
Contains no banned
substances as specified
in UAT-0480/100 (e.g.
no cadmium or asbestos)
To Next Page
Loading...
