SICK DL100 Pro CANopen - Accessories; Mounting Systems

14 Accessories
NOTE
On the product page you will find accessories and, if applicable, related installation
information for your product.
The call is made via the SICK Product ID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).
14.1 Mounting systems
137 (5.39)
137 (5.39)
132.17 (5.20)
132.17 (5.20) 104.5 (4.11)
126 (4.96)
126 (4.96)
66 (2.60)
(66) (2.60)
86.34 (3.40)
max. 120.55 (4.75)
109.75 (4.32)
8 (0.31)
5 (0.20)
12.7 (0.50)
5 (0.20)
14.5 (0.57)
27.5 (1.08)
48 (1.89)
48 (1.89)
8 (0.31)
Ø 5.4 (0.21)
Ø 5.4 (0.21)
Ø 5.4 (0.21)
Ø 5.4 (0.21)
75.72 (2.98)
(7.75) (0.31)
71 (2.80)
(69.4) (2.73)
Figure 27: Alignment bracket; unit: mm (inch), decimal separator: period
Table 69: Alignment bracket
Description Alignment bracket including fastening accessories
Type BEF-AH-DX100
Part number 2058653
Material Galvanized sheet steel
ACCESSORIES 14
8015418/19HA/2022-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | DL100 Pro CANopen
103
Subject to change without notice