SICK DT80 IO-Link User Manual

WARNING
Electrical voltage!
Electrical voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
The power supply must be disconnected when attaching and detaching electrical
connections.
■
The product must only be connected to a voltage supply as set out in the require‐
ments in the operating instructions.
■
National and regional regulations must be complied with.
■
Safety requirements relating to work on electrical systems must be complied with.
WARNING
Risk of injury and damage caused by potential equalization currents!
Improper grounding can lead to dangerous equipotential bonding currents, which may
in turn lead to dangerous voltages on metallic surfaces, such as the housing. Electrical
voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
Follow the notes in the operating instructions.
■
Install the grounding for the product and the system in accordance with national
and regional regulations.
2.7 Warning signs on the device
A class 2 laser is installed in the device. The housing is labeled with a warning sign.
1
2
3
Complies with 21 CFR 1040.10
and
1040.11 except for
conformance with IEC 60825-1
Ed. 3., as
described in Laser
Notice
No. 56, dated May 8, 2019.
EN 60825-1:2014+A11:2021
IEC 60825-1:2014
MAX. AVERAGE OUTPUT < 1mW
PULSE LENGTH > 400PS
WAVELENGTH = 655 nm
Figure 1: Warning symbol on the device: Class 2 Laser Product (EN/IEC 60825-1:2014), identical
laser class for issue EN/IEC 60825-1:2007
1
EN 60825-1:2014+A11:2021, IEC 60825-1:2014
Conforms to 21 CFR 1040.10 and 1040.11 except for conformance to IEC 60825-1 Ed.
3, as described in Laser Notice No.56 dated 8May2019.
2
Laser radiation – Never look into the light beam– Laser class 2 (EN
60825-1:2014+A11:2021, IEC 60825-1:2014)
3
Max. average power <1mW
Wavelength = 655nm
Pulse length >400ps
2 SAFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220.1N23/2024-05-24 | SICK
Subject to change without notice

SICK DT80 IO-Link Specifications

General

Brand	SICK
Model	DT80 IO-Link
Category	Accessories
Language	English