SICK DT80 IO-Link User Manual

4 Transport and storage
4.1 Transport
NOTICE
Damage due to improper transport!
■
The product must be packaged with protection against shock and damp.
■
Recommendation: Use the original packaging.
■
Note the symbols on the packaging.
■
Do not remove packaging until immediately before you start mounting.
4.2 Unpacking
•
To protect the device against condensation, allow it to equilibrate with the ambient
temperature before unpacking if necessary.
•
Handle the device with care and protect it from mechanical damage.
4.3 Transport inspection
Immediately upon receipt in incoming goods, check the delivery for completeness and
for any damage that may have occurred in transit. In the case of transit damage that is
visible externally, proceed as follows:
•
Do not accept the delivery or only do so conditionally.
•
Note the extent of damage on the transport documents or on the transport compa‐
ny’s delivery note.
•
File a complaint.
NOTE
Complaints regarding defects should be filed as soon as these are detected. Damage
claims are only valid before the applicable complaint deadlines.
4.4 Storage
•
Do not store outdoors.
•
Store in a place protected from moisture and dust.
•
Recommendation: Use the original packaging.
•
Do not expose to any aggressive substances.
•
Protect from sunlight.
•
Avoid mechanical shocks.
•
Storage temperature: see "Technical data", page 37.
•
Relative humidity see "Technical data", page 37.
•
For storage periods of longer than 3months, check the general condition of all
components and packaging on a regular basis.
4 TRANSPORT AND STORAGE
14
O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220.1N23/2024-05-24 | SICK
Subject to change without notice

SICK DT80 IO-Link Specifications

General

Brand	SICK
Model	DT80 IO-Link
Category	Accessories
Language	English