SICK DT80 IO-Link User Manual

Error code Meaning Remedial actions
0x020100FF INFO - Measurement error: Signal low Increase the reflectivity of the meas‐
uring object or reduce the measuring
distance
0x02010100 INFO - Measurement error: Signal
high
Reduce the reflectivity of the meas‐
uring object or increase the measur‐
ing distance
0x02010101 INFO - Measurement error: Ambient
light
Reduce the ambient light
0x02010103 INFO - Measurement error: Peak
value high
Reduce the reflectivity of the meas‐
uring object
0x040100FC ERROR - Temperature range
exceeded
Lower the ambient temperature
0x040100FD ERROR - Temperature range under‐
shot
Increase the ambient temperature
0x04020003 ERROR - Low supply voltage Check the electrical environment and
improve it, if necessary: stability, volt‐
age supply, EMC influences
All error codes
except those pre‐
viously listed
Device error, not correctable by user Contact SICK Service
9.4 Repair
Repairs on the device may only be performed by qualified and authorized personnel
from SICK AG. Interference with or modifications to the device on the part of the
customer will invalidate any warranty claims against SICK AG.
9.5 Return
►
Only send in devices after consulting with SICK Service.
►
The device must be sent in the original packaging or an equivalent padded pack‐
aging.
NOTE
To enable efficient processing and allow us to determine the cause quickly, please
include the following when making a return:
•
Details of the contact person
•
Description of the application
•
Description of the error that occurred
9.6 Disposal
If a device can no longer be used, dispose of it in an environmentally friendly manner
in accordance with the applicable country-specific waste disposal regulations. Do not
dispose of the product along with household waste.
NOTICE
Danger to the environment due to improper disposal of the device.
Disposing of devices improperly may cause damage to the environment.
Therefore, observe the following information:
■
Always observe the national regulations on environmental protection.
■
Separate the recyclable materials by type and place them in recycling containers.
TROUBLESHOOTING 9
8028220.1N23/2024-05-24 | SICK O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link
35
Subject to change without notice

SICK DT80 IO-Link Specifications

General

Brand	SICK
Model	DT80 IO-Link
Category	Accessories
Language	English