SICK LD-LRS - Product Description; Scope of Delivery; Status Indicators; Type Label

3 Product description
3.1 Scope of delivery
The delivery of the device includes the following components:
Table 2: Scope of delivery
No. of
units
Component Note
1 Device in the version ordered Depending on version
Without connecting cables and brackets
1 Lens cloth For cleaning the optics cover
1 Printed safety notes, multilin‐
gual
Brief information and general safety notes
3.2 Status indicators
Operator interface
The device works fully automatically in normal operation and requires no operator
intervention.
The SOPASET configuration software allows interactive configuration. For this, the
software runs on a computer which is connected to the device with one of the data
interfaces.
The graphical scan display in SOPASET is used to verify the generated measured
values and the measuring range online.
NOTE
Scans in SOPAS ET are not displayed in real time, but at a limited speed. Not all
measured values are displayed for this reason.
3.3 Type label
The type label gives information for identification of the device.
2
6
9
3
8
7
1
4
5
Figure 1: LD-LRS type label (example)
1
Type code
2
Part number
3
Serial number
4
Voltage supply
5
MAC address
6
Conformity mark/certification mark
7
Manufacturer, place of production, production date
8
Data Matrix code with product data and link to product page
9
WEEE marking
3 PRODUCT DESCRIPTION
10
O P E R A T I N G I N S T R U C T I O N S | LD-LRS 8016506/1G07/2020-11-08 | SICK
Subject to change without notice