SICK LFP Inox - General Safety Notes; Repairs

OPERATING INSTRUCTIONS | LFP INOX 8019921/15H0 / 2019-09-30 | SICK AG
Irrtümer und Änderungen vorbehalten
10
2 SAFETY INFORMATION
2.7 General safety notes
• Read the operating instructions prior to commissioning.
• These operating instructions are valid for devices with rmware version 4.00 and
above.
• The LFP is not a safety component under the EU Machinery Directive.
• Observe national safety and work safety regulations.
• Wiring work and the opening and closing of electrical connections may only be
carried out when the power is switched o.
• The radiated power is far lower than that from telecommunication equipment.
According to current scientic research, the operation of this device can be classi-
ed as safe and non-hazardous.
2.8 Repairs
Repair work on the sensor may only be performed by qualied and authorized per-
sonnel from SICK AG. Interference with or modications to the sensor on the part of the
customer will invalidate any warranty claims against SICK AG.