SICK LFP Inox - Page 24

OPERATING INSTRUCTIONS | LFP INOX 8019921/15H0 / 2019-09-30 | SICK AG
Irrtümer und Änderungen vorbehalten
24
7 COMMISSIONING
Note:
• Measurement deviation may be higher.
• Signal quality 1 and 2 are not counted
• The sensor automatically quits expert mode after 5 minutes of inactivity on the
display.
• Conguration (foam teach) does not take place in the following processes:
• Changing the probe length
• Changing the measuring mode
• Changing the teach-in depth
• Running AutCal
For problems during commissioning, see “11 Troubleshooting”.