12.6.4.4 Observing the inspection results
When the configuration has been activated and the PLC is in “RUN” mode, the inspec‐
tion results can be observed in the instance DB of the generated structure, in this case
DB_Trispector_Data. The structure is updated each time when the inspector sends new
data (Done flag).
APPENDIX 12
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
93
Subject to change without notice
To Next Page
Loading...
